
Swimming Pool Heater Repair
in Austin, TX
What Our Clients Are Saying
Pool Heater Installation and Repair
If a cold front comes through or you’d like your spa heated for the weekend and your pool heater fails, you’re stuck. Aqua Clear Pool Care has been installing and repairing pool heaters for hundreds of clients in Austin & surrounding Hill Country since 2015. We service all pool heater brands and can install new heaters as well. Our technicians are trained to repair and install Pentair, Jandy, Hayward, and Raypak. From no ignition to error codes and heat pumps that failed after a cold snap, we can get your heater up and running.
Pool Heater Brands & Error Codes We Service in Austin
It’s helpful to know the make and model of your heater, typically found on the appliance itself. Please find your model below, and if you need any further help, don’t hesitate to contact us.
| Type | Brand | Product Name | Model Number |
|---|---|---|---|
| Gas Heater | Pentair | MasterTemp | |
| Gas Heater | Pentair | Max-E-Therm® | |
| Heat Pump | Pentair | UltraTemp | |
| Gas Heater | Pentair | Minimax | |
| Gas Heater | Jandy | JXI Pool Heater | |
| Gas Heater | Jandy | Jandy JXiQ Pool Heater | |
| Gas Heater | Jandy | Hi-E2 | |
| Gas Heater | Hayward | Universal H-Series | |
| Gas Heater | Hayward | Universal HC-Series | |
| Heat Pump (Heat and Chill) | Raypak | Crosswind 50-I | |
| Heat Pump (Heat and Chill) | Raypak | Crosswind 65-I | |
| Heat Pump (Heat and Chill) | Jandy | Versatemp – 103,000 BTUS | JRT2000R |
| Heat Pump (Heat and Chill) | Jandy | Versatemp – 116,000 BTUS | JRT2500R |
| Heat Pump (Heat and Chill) | Jandy | Versatemp – 130,000 BTUS | JRT3000R |
| Heat Pump (Heat and Chill) | Pentair | UltraTemp High Performance Pool Heat Pump 120 H/C | |
| Heat Pump (Heat and Chill) | Pentair | UltraTemp High Performance Pool Heat Pump 140 H/C | |
| Heat Pump (Heat and Chill) | Hayward | HeatPro Heat-Cool Pump 100k BTU | HP31005T |
| Heat Pump (Heat and Chill) | Hayward | HeatPro Heat-Cool Pump 120k BTU | HP31205T |
| Heat Pump (Heat and Chill) | Hayward | HeatPro Heat-Cool Pump 140k BTU | HP31405T |
| Heat Pump | Hayward | HeatPro Series | |
| Heat Pump | AquaCal | HeatWave SuperQuiet | |
| Heat Pump | AquaCal | TropiCal | |
| Heat Pump | Pentair | UltraTemp |
Error Codes
| Pentair MasterTemp • Max-E-Therm Pentair MasterTemp error codes | Jandy JXi • LXi Jandy JXi & LXi error codes | Hayward Universal H-Series Hayward heater error codes | Raypak Gas heaters Raypak heater error codes |
Signs Your Pool Heater Needs Repaired
Pool heater not heating / not working?
We can help troubleshoot and repair a wide range of pool heater issues, including but not limited to heating element and thermostat failures. Below are some common symptoms of a faulty pool heater. Austin’s hard water and cold spells during the winter can take their toll on your heater, so it’s a good idea to have your unit serviced to prevent further damage (e.g., a cracked heat exchanger):
- Heater is not bringing pool up to temperature – most likely a defective thermostat, temp sensor, or regulator valve not opening/closing correctly.
- Pool heater won’t light or run continuously – check for faulty igniter, dirty flame sensor, blocked gas jet and/or low gas pressure.
- Pool heater kettling, banging and/or whistling – low water flow (i.e. dirty filter) or scale/calcium build up on the heat exchanger.
- Pool heater leaking – most commonly the heat exchanger, manifold O-rings and/or header gasket. Usually as a result of poor water chemistry and/or freezing.
- Error code on heater display – AFS, HLS, IGN, E05 etc (dependent on manufacturer) will indicate a blocked air flow, high limit switch activation, or ignition failure.
- Heat pumps that freeze over / trip breakers in cold weather – typically a failed defrost sensor, low charge, or failed capacitor.
Yes, freezing can damage your central Texas heat. Following the freezes in 2021 and 2023 we’ve seen many freeze-related failures in Austin (headers, manifolds, heat exchangers etc.). It’s worth getting your heating system checked out if it was exposed to freezing conditions.
Pool Heater Types We Service & Install
Pool heaters allow you to enjoy swimming in your pool during the cooler months. If you’re trying to decide whether to have your heater repaired or replace it with a newer model, we service all popular pool heaters available in Central Texas:
- Gas Pool Heaters (natural gas & propane): Heat the pool water using natural gas or propane. Will heat the pool/spa in a relatively short period of time and are not affected by outside air temperatures. The most commonly installed fuel type in the Austin area. Excellent for quickly heating a spa (30-45 mins) or heating the pool before a weekend event. Can be costly to operate due to fuel costs.
- Electric Heat Pump: Very efficient, extracting heat from the surrounding Central Texas air. Will take longer to heat the pool/spa but is an economical option to maintain a set temperature over the warmer months. Will not operate efficiently as the outside air temperature drops near freezing and may activate defrost cycles/trip breakers.
- Dual Fuel: Combination of a heat pump and gas heater. Allows for economical heat pump operation most of the year and the ability to quickly heat a spa in the winter.
(Note: We will service any plumbing associated with current solar systems. However, our services are limited to gas heaters and heat pumps. Looking to compare? See our gas heater vs. heat pump guide.
Repair vs. Replace: Should you repair your pool heater or buy a new one?
This is a common question we get from Austin pool owners. We’ll always provide you with an honest assessment to help you decide.
- Repair – if your pool heater is less than 7-8 years old, the heat exchanger is not compromised, and the fault is with a component such as a sensor, igniter, PCB, pressure switch or heat exchanger/manifold gasket.
- Replace – if your pool heater is 10+ years old, the heat exchanger is breached or the cost of repair is greater than 50% of a new pool heater. Upgrading to a high efficiency pool heater (e.g. Pentair MasterTemp, Jandy JXi) will reduce your gas bill and is compatible with most smart pool controllers. Browse our best pool heaters for Austin homes.
Recent Projects





Latest Blog Posts
Jandy JXi and LXi Pool Heater Error Codes: Causes and Common Fixes
A pool heater is one of the best upgrades for extending your swimming season, especially for homeowners in Austin and Central Texas where cooler temperatures can still make morning and…
Pool Valve Actuators Explained: What They Are, How They Work, and How to Troubleshoot Them
What Is a Pool Valve Actuator? If your pool has automation, water features, a spa, or multiple circulation modes, there is a good chance your system uses electric valve actuators.…
Pool Pump Running Time by Season: A Complete Guide for Austin Pool Owners
One of the most common questions pool owners ask is: “How long should I run my pool pump each day?” The answer depends on several factors, including the season, water…
Serving the Entire Austin Area
Our pool heater repair service covers most of the Austin metro and surrounding Hill Country areas. Our local service vans operate on regular routes to the following areas:
Central & West Austin: Tarrytown, Rollingwood, West Lake Hills, Lost Creek, Rob Roy, Northwest Hills, Great Hills, Barton Creek;
Southwest & Hill Country: Circle C, Dripping Springs, Belterra, Highpointe, Driftwood, Bee Cave, Lakeway, The Hills, Spanish Oaks, Sweetwater, Spicewood;
North & Northwest: Steiner Ranch, Cedar Park, Leander, Crystal Falls, Jonestown, Lago Vista, Round Rock, Georgetown, Pflugerville, Hutto;
Schedule Your Austin Pool Heater Repair Today
If your pool heater has failed, don’t let it put an end to your swimming. Call our Austin pool care company to arrange a repair and diagnostic visit by one of our qualified technicians. Speak with Aqua Clear Pool Care to learn more. We can service and upgrade all aspects of your pool equipment to ensure your pool is operating optimally – from pool pump replacement to filter cleaning, salt cell replacement, and full automation of your pool.
Pool Heater Repair FAQs for Austin Homeowners
How much does pool heater repair cost in Austin, TX?
Costs will depend on the make/model and age of the furnace, as well as the part needing replacement. Most jobs will involve an igniter, temperature sensor and/or pressure switch. Others may require a new control board and/or heat exchanger. We’ll assess your furnace and advise on any repairs needed. Contact us to book an assessment.
Why does my pool heater keep shutting off after a few minutes?
Low water flow through the heater is typically caused by a dirty filter(s), clogged filter basket(s) and/or an underpowered pump, tripping the low water pressure switch. This can also be caused by a dirty flame sensor, scale build-up on the heat exchanger, and/or a tripped high limit. Refer to the above and if you have a pool filter/pump issue, we can service that as well.
How does Austin’s hard water affect my pool heater?
Scale will build up on the heat exchanger and over time, cause low flow, kettling/high limit trips and ultimately failure of the heat exchanger. Keeping your pool water chemistry in the recommended range will help reduce the rate of scale build-up. Check out our article on pool water chemistry for Austin.
Do you require a permit or licensed plumber for gas line hookups on new heaters in Austin?
This will vary by municipality, but typically yes, a permit will be required to extend gas to your new heater and a plumber to complete that work. We can advise on the requirements for your city (Austin, Lakeway, Cedar Park, etc.).
